2
10
Preparation
Installing / Removing the Base Stand
The LCD display is very fragile, and must be protected at all times when installing and removing the base stand. Be sure that
no hard or sharp object, or anything that could scratch or damage the LCD display, comes into contact with it. DO NOT exert
pressure on the front of the TV at any time because the screen could crack.
Fitting the Stand
1. Ensure the TV is switched off and not connected to the mains power supply.
2. Lay the TV down on a flat surface ideally on the edge of a table so the base of the TV slightly overhangs the edge of the table,
with the back side facing up. Please make sure a soft cushioned material (such as a dry bath towel or thick piece of foam) is
placed beneath the screen.
3. Rip the protective bag open to access the bottom of the TV.
4. Connect stand 'A' to mounting point 'A' with one of the screws provided and then connect stand 'B' to mounting point 'B' with
one of the screws provided.
Table
Cushioned
material
Protective
bag
If you don't have a table big enough, you can use the TV box. Lie the box flat, make sure you place the polystyrene back in
the box first to give the box some rigidity and strength.
Prepar
ation
JVC 32' Amazon Fire LED Smart HD TV LT-32CF600 Manual.indd 10
JVC 32' Amazon Fire LED Smart HD TV LT-32CF600 Manual.indd 10
21/01/2021 12:30
21/01/2021 12:30
