17
3
Initial Setup
Choosing your language
The first time you switch your TV on it will automatically be in the initial setup mode. This will guide you through the whole setup
process of selecting your desired language, connecting to the internet, signing in to your Amazon account and tuning in TV
channels.
Connecting to the Internet
You have a few options when connecting your TV to the internet. You can connect your TV to your router directly by connecting
a LAN cable (wired connection) to your TV or you can connect wirelessly via Wi-Fi. If you choose to connect via Wi-Fi you have 3
ways to connect, select your network and enter your password, use the WPS button or use WPS pin code. Choose your connection
method and follow these instructions.
WIRED Connection
If you have connected your ethernet cable to the LAN socket on the back of your TV, your TV will automatically connect to the
internet. You'll now be asked to sign in to your Amazon account.
Wireless Connection
You can connect using a wireless connection via your router.
Best connection
speed
Maximum distance
5m
Wireless Router
Wireless Router
1. Your TV will automatically
scan for your wireless
network, then show you a list
of networks that its found.
Highlight your network and
press the
SELECT
button.
2. Enter your Wi-Fi password,
then highlight Connect and
press the
SELECT
button.
In a second or two your
TV will show Connection
Successful.
Make sure your TV
is as close to your
router as possible,
within 5m and
ideally in the same
room as the TV.
Initial S
etup
1. Press the
buttons to
highlight your LANGUAGE
then press the SELECT
button.
2. Your remote control should
automatically pair, but if it
hasn’t press and hold the
HOME
button to pair it.
3. Press the
SELECT
button to
continue.
4. Press the buttons to
highlight ENABLE and press
SELECT
.
JVC 32' Amazon Fire LED Smart HD TV LT-32CF600 Manual.indd 17
JVC 32' Amazon Fire LED Smart HD TV LT-32CF600 Manual.indd 17
21/01/2021 12:30
21/01/2021 12:30
