ENGLISH
25
Data Size:
B6L (182 mm x 128 mm)
Book Size:
B6L (182 mm x 128 mm)
[PRO EQ]
Adjusts your own sound settings.
• The settings are stored to
[USER]
in
[PRESET EQ]
.
• The settings made may affect the current settings of
[EASY EQ]
.
[62.5HZ]
[LEVEL –09]
to
[LEVEL +09]
(
[LEVEL 00]
): Adjusts the level to memorize for each source.
(Before making an adjustment, select the source you want to adjust.)
[ON]
: Turns on the extended bass. ;
[OFF]
: Cancels.
[100HZ]
/
[160HZ]
/
[250HZ]
/
[400HZ]
/
[630HZ]
/
[1KHZ]
/
[1.6KHZ]
/
[2.5KHZ]
/
[4KHZ]
/
[6.3KHZ]
/
[10KHZ]
/
[16KHZ]
[LEVEL –09]
to
[LEVEL +09]
(
[LEVEL 00]
): Adjusts the level to memorize for each source.
(Before making an adjustment, select the source you want to adjust.)
[Q FACTOR]
[1.35]
/
[1.50]
/
[2.00]
: Adjust the quality factor.
[AUDIO CONTROL]
[BASS BOOST]
[LEVEL +01]
to
[LEVEL +05]
: Selects your preferred bass boost level. ;
[OFF]
: Cancels.
[LOUDNESS]
[LEVEL 01]
/
[LEVEL 02]
: Boosts low or high frequencies to produce a well-
balanced sound at low volume. ;
[OFF]
: Cancels.
[SUB.W
LEVEL]
*1
[SPK-OUT]
*2
(Not applicable when 3-way crossover is selected.)
[SUB.W 00]
to
[SUB.W +06]
(
[SUB.W +03]
): Adjusts
the output level of the subwoofer connected via speaker
lead. (Page 40)
[PRE-OUT]
*3
[SUB.W –50]
to
[SUB.W +10]
(
[SUB.W 00]
): Adjusts
the output level of the subwoofer connected to the
lineout terminals (SW or REAR/SW) through an external
amplifier. (Page 41)
[SUBWOOFER
SET]
*3
[ON]
: Turns on the subwoofer output. ;
[OFF]
: Cancels.
[FADER]
(Not applicable when 3-way crossover is selected.)
[POSITION R15]
to
[POSITION F15]
(
[POSITION 00]
): Adjusts the front and
rear speaker output balance.
[BALANCE]
*4
[POSITION L15]
to
[POSITION R15]
(
[POSITION 00]
): Adjusts the left and
right speaker output balance.
[VOLUME
ADJUST]
[LEVEL –15]
to
[LEVEL +06]
(
[LEVEL 00]
): Presets the initial volume level
of each source by comparing to the FM volume levels. (Before adjustment,
select the source you want to adjust.)
[AMP GAIN]
[LOW POWER]
: Limits the maximum volume level to 25. (Select if the
maximum power of each speaker is less than 50 W to prevent damaging
the speakers.) ;
[HIGH POWER]
: The maximum volume level is 35.
[SPK/PRE OUT]
(Not applicable when 3-way crossover is selected.)
Depending on the speaker connection method, select the appropriate
setting for the desired output. (See “Speaker output settings” on
page 26.)
[SPEAKER SIZE]
Depending on the crossover type you have selected (see
[X ' OVER TYPE]
),
2-way crossover or 3-way crossover setting items will be shown. (See
“Crossover settings” on page 27.)
By default, 2-way crossover type is selected.
[X ' OVER]
[DTA SETTINGS]
For settings, see “Digital Time Alignment settings” on page 29.
[CAR SETTINGS]
[X ' OVER TYPE]
Caution
: Adjusts the volume before changing the
[X ' OVER TYPE]
to avoid
the sudden increase or decrease of the output level.
[2-WAY]
(Displayed only when
[3-WAY]
is selected.)
[YES]
: Selects two way crossover type. ;
[NO]
: Cancels.
[3-WAY]
(Displayed only when
[2-WAY]
is selected.)
[YES]
: Selects three way crossover type. ;
[NO]
: Cancels.
*1 Displayed only when
[SUBWOOFER SET]
is set to
[ON]
.
*2 For 2-way crossover: Displayed only when
[SPK/PRE OUT]
is set to
[SUB.W/SUB.W]
.
(Page 26)
*3 For 2-way crossover: Displayed only when
[SPK/PRE OUT]
is set to
[REAR/SUB.W]
or
[SUB.W/SUB.W]
. (Page 26)
*4 This adjustment will not affect the subwoofer output.
AUDIO SETTINGS
JS_JVC_KD_T905BTS_K_EN_08.indd 25
JS_JVC_KD_T905BTS_K_EN_08.indd 25
6/4/2018 11:36:05 AM
6/4/2018 11:36:05 AM