(No.49872)1-7
3.1.4 Removing the heat sink
(See Fig.5)
• Prior to performing the following procedure, remove the front
panel assembly as required.
(1) From the left side of the main body, remove the two screws
C
and screw
D
attaching the heat sink.
Fig.5
3.1.5 Removing the rear bracket
(See Fig.6)
• Prior to performing the following procedure, remove the bottom
cover.
(1) From back side of the main body, remove the three screws
E
, three screws
F
and two screws
G
attaching the rear
bracket.
Fig.6
3.1.6 Removing the main board
(See Fig.7)
• Prior to performing the following procedures, remove the front
panel assembly, bottom cover, front chassis assembly, heat
sink and rear bracket.
(1) From the bottom side of the main body, remove the two
screws
H
attaching the main board.
(2) Disconnect the connector
CN501
from the CD mechanism
assembly and remove the main board.
Fig.7
Heat sink
C
C
D
G
E
Rear bracket
G
F
E
F
Main board
H
H
CN501
www. xiaoyu163. com
QQ 376315150
9
9
2
8
9
4
2
9
8
TEL 13942296513
9
9
2
8
9
4
2
9
8
0
5
1
5
1
3
6
7
3
Q
Q
TEL 13942296513 QQ 376315150 892498299
TEL 13942296513 QQ 376315150 892498299
