JVC KA-M790G Скачать руководство пользователя страница 2

Read all of these instructions.
Save these instructions for later use.
All warnings on the product and in the operating instructions should be adhered to.
Unplug this appliance system from the wall outlet before cleaning. Do not use liquid cleaners or 
aeroso l cleaners. Use a damp cloth f or cleaning.
Do not use attachments not recommended by the appliance manufacturer as they may cause hazards.
Do not use this appliance near water - for example, near a bathtub, washbowl, kitchen sink, or 
laundry tub, in a wet basement, or near a swimming pool, etc.
Do not place this appliance on an unstable cart, stand, or table. The appliance may 
fall, causing serious injury to a child or adult, and serious damage to the appliance.
Use only with a cart or stand recommended by the manufacturer, or sold with the 
appliance. Wall or shelf mounting should follow the manufacturer’s instructions, 
and should use a mounting kit approved by the manufacturer. An appliance and  
cart combination should be moved with care.
Quick stops, excessive force, and uneven surfaces may cause the appliance and 
cart combination to overturn.
Slots and openings in the cabinet and the back or bottom are provided for 
ventilation, and to insure reliable operation of the appliance and to protect it from 
overheating, these openings must not be blocked or covered. The openings 
should never be blocked by placing the appliance on a bed, sofa, rug, or other similar surface.
This appliance should never be placed near or over a radiator or heat register. This appliance should 
not be placed in a built-in installation such as a bookcase unless proper ventilation is provided.
This appliance should be operated only from the type of power source indicated on the marking label. 
If you are not sure of the type of power supplied to your home, consult your dealer or local power 
company. For appliance designed to operate from battery power, refer to the operating instructions.
For added protection for this product during a lightning storm, or when it is left unattended and 
unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable 
system. This will prevent damage to the product due to lightning and power-line surges.
Do not allow anything to rest on the power cord. Do not locate this appliance where the cord will be 
abused by persons walking on it.
Follow all warnings and instructions marked on the appliance.
Do not overload wall outlets and extension cords as this can result in fire or electric shock.
Never push objects of any kind into this appliance through cabinet slots as they may touch 
dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill 
liquid of any kind on the appliance.
Do not attempt to service this appliance yourself as opening or removing covers may expose you to 
dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
Unplug this appliance from the wall outlet and refer servicing to qualified service personnel under 
the following conditions:

a. When the power cord or plug is damaged or frayed.
b. If liquid has been spilled into the appliance.
c. If the appliance has been exposed to rain or water.
d. If the appliance does not operate normally by following the operating instructions. Adjust only those controls 

that are covered by the operating instructions as improper adjustment of other controls may result in damage 
and will often require extensive work by a qualified technician to restore the appliance to normal operation.

e. If the appliance has been dropped or the cabinet has been damaged.
f.

When the appliance exhibits a distinct change in performance - this indicates a need for service.

When replacement parts are required, be sure the service technician has used replacement parts 
specified by the manufacturer that have the same characteristics as the original part. Unauthorized 
substitutions may result in fire, electric shock, or other hazards.

1.
2.
3.
4.

5.
6.

7.

8.

9.

10.

11.

12.
13.
14.

15.

16.

17.

18.

Upon completion of any service or repairs to this appliance, ask the service technician to perform 
routine safety checks to determine that the appliance is in safe operating condition.

IMPORTANT SAFEGUARDS

PORTABLE CART WARNING

(symbol provided by RETAC)

S3125A

II

Introduction

FOR USA
These are general IMPORTANT SAFEGUARDS and certain items may not apply to all appliances.

KA-M790G.book  Page II  Friday, May 21, 2010  10:54 PM

Содержание KA-M790G

























Отзывы: