JVC HR-DVS2EU, Инструкция по эксплуатации

Страница: 50 / 88

50
EN
Edit From
A Camcorder
You can use a camcorder as the source player and your video
recorder as the recorder.
You can perform digital dubbing if you connect a device such
as a camcorder which has a DV output/input connector.
Because the signals are digital, there is no loss of video or audio
quality as a result of editing.
MAKE CONNECTIONS
1
A If the camcorder has no S-VIDEO output connector...
... connect the camcorder’s AUDIO/VIDEO OUT
connectors to the recorder’s front panel AUDIO/
VIDEO input connectors.
B If the camcorder has an S-VIDEO output connector...
... connect the camcorder’s S-VIDEO OUT and
AUDIO OUT connectors to the recorder’s front
panel S-VIDEO and AUDIO input connectors.
A C If the camcorder has a DV OUT/IN connector...
... connect the camcorder’s DV OUT/IN connector
to the recorder’s DV IN/OUT connector.
●
When using a monaural camcorder, connect its
AUDIO OUT connector to the AUDIO L input
connector on your recorder.
●
When a Master Edit Control-equipped JVC camcorder
is used, the camcorder is capable of controlling the
recorder. Refer to the camcorder’s instruction manual
for operating procedure.
SELECT RECORDING DECK
2
Press VHS or DV .
SET RECORDER’S INPUT MODE
3
Press PR on the recorder to select "F-1".
●
When using the VHS deck as the recording deck, set
"VHS F-1 INPUT" to "VIDEO" for the AUDIO/VIDEO
input connectors, or "S-VIDEO" for the AUDIO/
S-VIDEO input connectors, depending on the
connectors being used (
墌
pg. 59).
SET EDIT MODE
(VHS DECK ONLY)
4
See "Picture Control" on page 45.
START CAMCORDER
5
Engage its Play mode.
START RECORDER
6
Engage its Record mode.
NOTES:
●
All necessary cables can be obtained from your dealer.
●
You can also use another video recorder as the player instead
of a camcorder.
●
When you select "EDIT" to dub tapes in step 4 , be sure to
select "AUTO" (or "NORM" when "B.E.S.T." is set to "OFF")
after you finish dubbing the tapes.
●
When you are editing through the DV IN/OUT connector, the
recorder will stop if the player begins playing a blank portion
of tape or the signal is interrupted.
EDITING (cont.)
VHS
DV
PR