EN
35
NOTES:
●
To Change The Stop Time . . .
. . . press
STOP +/–
in step
4
. You can compensate for
anticipated programme schedule delays this way.
●
To Timer-Record Weekly Or Daily Serials . . .
. . . in step
4
, press
WEEKLY
(
NUMBER
key "9") for weekly
serials or
DAILY
(
NUMBER
key "8") for daily serials (Monday
– Friday). Either "WEEKLY" or "DAILY" appears on the screen.
Pressing the button again makes the corresponding indication
disappear.
●
You can programme the VHS deck and the DV deck to timer-
record as many as 6 programmes each. If you try to programme
each deck to record a seventh, "PROGRAM FULL" appears on
screen and "FULL" appears on the front display panel. To record
the extra programme, you must first cancel any unnecessary
programmes (
pg. 38).
●
It is not possible to timer-record a TV programme with a
S
HOW
V
IEW
number which starts with "0".
●
It is not possible to timer-record the same programme on both
the VHS deck and the DV deck simultaneously.
●
If the times that are programmed for recording on the DV
deck and on the VHS deck overlap, the earlier start time takes
precedence. If the start times are the same, the VHS deck
takes precedence.
(Ex.) To timer-record a ZDF
programme with the
S
HOW
V
IEW
system.
* If your recorder receives
ZDF on the channel
position 2, press
OK
or
#
after entering "2".
Satellite Receiver Users
To timer-record a satellite broadcast using the S
HOW
V
IEW
system:
1
Perform "Satellite Receiver Control Setting" (
pg. 13).
2
Perform steps
1
–
8
. In step
4
, the display panel shows
"L2" for the preset position. In step
6
, you cannot set
"VPS/PDC" to "ON".
3
Leave the satellite receiver's power on.
GUIDE PROG SET
GUIDE PROG
TV PROG
2
– –
[
5∞
]
=
[0] : SAT
[PROG] : EXIT
Timer Warning
If you have programmed your
recorder to timer-record a
programme or a series of
programmes, a warning
appears on screen to tell you
that the recording is to start in
5 minutes.
NOTES:
●
The warning only appears if
you’re not in the Timer mode at that time.
●
If this recorder is being used as the player for tape
dubbing, the warning screen is recorded on the tape in
the other video recorder.
The warning blinks for the entire 5 minutes leading up to
the start of timer recording. To clear the display, press .
– WARNING–
TIMER RECORDING
TO START SOON
[
]
ATTENTION
Regarding Guide Program Number Set
"GUIDE PROG SET" appears after performing step
3
if the
Guide Program number for the S
HOW
V
IEW
number you
entered has not been set.
●
If you want to set the Guide Program number for the
satellite broadcast station, press the
NUMBER
key "0" to
change "TV PROG" to "SAT". Press
%fi
to input the
channel position number on which your recorder or
satellite receiver receives that station, then press
OK
or
#
to set the Guide Program Number. The S
HOW
V
IEW
Program screen appears.
IMPORTANT
Make sure the channel position number you wish
to record is displayed; if not, see "S
HOW
V
IEW
System
Setup" on page 67 and set the Guide Program
number for that S
HOW
V
IEW
number correctly.
●
If the number you entered is invalid, "ERROR" appears
on the screen and "Err" appears on the display panel.
Press and input a valid S
HOW
V
IEW
number.
●
If the "GUIDE PROG SET" screen appears, see
"ATTENTION – Regarding Guide Program Number
Set" in the right column.
SET TAPE SPEED
5
Press
SP/LP/EP (
)
to set the tape speed.
●
It is not possible to select EP mode if "COLOUR
SYSTEM" is set to "MESECAM". (
pg. 17)
(VHS deck only)
SET VPS/PDC MODE
6
Press
VPS/PDC
to select "ON" or "OFF".
If "VPS/PDC ON" is displayed on the screen or "VPS/
PDC" is lit on the display panel, VPS/PDC is set to ON.
If "VPS/PDC OFF" is displayed on the screen or "VPS/PDC"
is not lit on the display panel, VPS/PDC is set to OFF.
"VPS/PDC Recording" on page 37.
RETURN TO NORMAL SCREEN
7
Press
PROG
or
OK
. "PROGRAM COMPLETED" appears
on the screen for about 5 seconds, then normal screen
appears. If "PROGRAM OVERLAPPED" appears on the
TV screen and "Err" on the front display panel, see page
39.
●
Repeat steps
1
–
7
for each additional programme.
ENGAGE RECORDER’S TIMER MODE
8
Press
‰
(
TIMER
). The recorder turns off automatically
and
‰
appears on the display panel.
●
To disengage the timer, press
‰
(
TIMER
) again.
Содержание HR-DVS2EU
Страница 87: ...MEMO ...
