82
11. MENU SCREENS
Selects whether the remaining battery level should be shown in minutes
[min], percentage [%] or voltage [V] in the LCD monitor or viewfinder.
VOLTAGE :
Indicates battery voltage in 0.1 V steps.
TIME
:
Remaining battery is shown in minutes [min].
CAPA%
:
Remaining battery is shown in percentage [%].
changes as shown below according to the remaining battery level.
: 50% or more
: 10% to less than 50%
: 10% or less
Selects whether or not the remaining tape time (minutes) is shown in the
status display on the LCD monitor or in the viewfinder.
(Camera mode: Status 1 screen, VTR mode: Status screen)
OFF : Not displayed.
ON : Displayed.
Selects whether or not the time code or user’s bits data should be shown
in the status display on the LCD monitor or in the viewfinder.
(Camera mode: Status 1 screen, VTR mode: Status screen)
OFF : Not displayed.
ON : Displayed.
* Whether the time code or user’s bits data is shown is selected with the
COUNTER switch.
Selects whether the audio level meters should be shown in the status
display on the LCD screen and the viewfinder screen.
(Camera mode: Status 1 screen, VTR mode: Status screen)
OFF : Not displayed.
ON : Displayed.
Adjusts the color saturation of the LCD monitor.
Adjusts the contour of the LCD monitor.
To return to the LCD/VF (1/2) menu screen, align the cursor with this
position and then press the SHUTTER dial.
11-10 LCD/VF Menu Screen (Cont’d)
■
LCD/VF (2/2) Menu Screen
VOLTAGE
TIME
CAPA%
OFF
ON
OFF
ON
OFF
ON
MAX (5)
4
to
NORMAL
to
–4
MIN (–5)
MAX (5)
4
to
NORMAL
to
–4
MIN (–5)
–––––
VOLTAGE
ON
OFF
OFF
NORMAL
NORMAL
–––––
Item
Function
Variation Range
Initial Setting
MEMO
:
BATTERY
INFO
TAPE
REMAIN
TC/UB
AUDIO
LCD COLOR
LCD
PEAKING
PAGE BACK
●
When remaining battery level is set to TIME or CAPA%, “ RES”
is shown when battery level becomes less than 10%.
●
Remaining battery levels in [min] and [%] can be selected when
an Anton-Bauer Battery Holder (QR JVC DIGI) is attached.
Remaining battery level is shown automatically in [V] when using
other battery holders.
●
When remaining battery level is set to TIME or CAPA% and
information from the battery is not correct (calibration required),
the display switches between voltage [V] and “ CAL” every 2
seconds.
e11_dv5100u(71_87)e.p65
12/10/04, 2:30 PM
82
