25
2. CONTROLS, INDICATORS AND CONNECTORS
No.
Item
Contents
1
Indication of Time Code (TC)/User’s Bits (UB)
In the playback mode, the recorded time code (hour, minute, second, frame)
is displayed. Whether or not to display this item is set with the TC/UB item
on the LCD/VF (2/2) menu screen. Whether to show the time code or the
user’s bits is selected with the COUNTER switch inside the side cover.
2
Remaining tape time
Remaining tape indication (displayed in 1-minute steps)
This indicator blinks when remaining tape time is equivalent to less than 3
minutes.
Whether or not to display this item is set with the TAPE REMAIN item on
the LCD/VF (2/2) menu screen.
* When inserting a brand-new tape, the remaining tape time is not indicated.
When the tape has been run, the indication will appear.
* The remaining tape indication is to be used only as a guide.
* When the unit is used at low temperatures, it may take a while before the
indication of the remaining tape time appears.
3
Indication of the DV Disk Recorder status
Displayed when the optional DV Disk Recorder is connected.
: Displayed (white) when the DV Disk Recorder is connected.
●
: Displayed (red) when the DV Disk Recorder is recording.
4
Voltage indication
(Example) 12.2 V : Indicates battery voltage in 0.1 V steps.
or
(Example) 100%: Remaining battery is shown in percentage [%].
Battery indication
(Example) 60min: Remaining battery is shown in minutes [min].
Select the display method with the BATTERY INFO item on the LCD/VF
(2/2) menu.
☞
See page 82
5
Time/Date indication
Recorded data are displayed during playback, fast forward, and rewind.
(Only when the DATE REC item is set to OFF (
☞
See page 85))
During recording and stop mode, the data from the DV connector is
displayed.
Whether or not the date and time should be displayed and the display style
are set on the TIME/DATE menu screen.
When the date and time have not been set, the following indication appears.
– – / – – / – –
– – : – – : – –
6
Audio sampling frequency indication
The audio sampling frequency used for the recording is displayed during
playback.
(32 K, 48 K, 44.1 K)
7
Audio level meter indication
Displays the audio level meters during playback.
Whether or not to display this item is set with the AUDIO item on the LCD/
VF (2/2) menu screen.
8
VTR mode indication
Indicates the VTR operation status.
STBY, STOP, PLAY, REC, FF, REW, FWD, REV, STL, BSRH, – – – (No
tape loaded), SLOW: During variable playback in forward direction
(SLOW+1: About
×
0.1 speed, SLOW+2: About
×
0.2
speed, SLOW+3: About
×
0.5 speed)
During variable playback in reverse direction
(SLOW–1: About
×
–0.1 speed, SLOW–2: About
×
–0.2 speed, SLOW–3: About
×
–0.5 speed)
9
Event display
BLANK SEARCH : Indicates that blank search operation is in progress.
■
Status Screen in VTR MODE (DV Signal Input Mode)
Event display area
00:00:00:00
20min
48k 12.2V
PLAY 01/02/03 AM01:23:45
DD
1
2
6
4
5
7
8
9
3
e04_dv5100u(21_30)e.p65
12/10/04, 3:19 PM
25
