48
6. SETTING AND ADJUSTMENTS BEFORE SHOOTING
White
Yellow
Cyan
Green Magenta
Red
Blue
Blue
Black
Magenta
Black
Cyan
Black
White
Black
White
Black
1
2
3
4
5
6
8
9
0
A
B
C
E
F
G
H I J K
7
D
1.
Adjust the position and angle of the viewfinder.
2.
Diopter adjustment
Rotate the eyepiece focusing ring until the viewfinder screen
image is clearly visible.
3.
Brightness and contrast adjustment
When the ambient brightness changes, etc., the brightness
and contrast of the viewfinder screen can be adjusted with
the BRIGHT and CONT controls.
MEMO:
The screen size of the viewfinder can be changed by
selecting the desired size with the ASPECT RATIO item
on the CAMERA OPERATION menu screen (4:3 or
LETTER).
■
SMPTE type color bars
Display the camera built-in color bar signal on the video monitor
and adjust the colors, contrast and brightness.
1.
Connect a color video monitor to the MONITOR OUT
connector of the GY-DV5100.
2.
Set the COLOR BARS/CAMERA/AUTO KNEE switch to
BARS to output the color bar signal (SMPTE type color
bars).
3.
Set the monitor’s BLUE CHECK function to ON while the
color bars are being displayed so that the screen turns
entirely blue and the color bars become blue stripes.
4.
Adjust the CHROMA control of the monitor so that there is
no difference in brightness between the color bars
1
and
8
,
7
and
D
.
5.
With the BLUE CHECK function ON, adjust the PHASE
control of the monitor so that there is no difference in
brightness between the color bars
3
and
0
,
5
and
B
.
6.
If the phase control adjustment above causes a difference
in brightness between the color bars
1
and
8
,
7
and
D
,
start again from the CHROMA control adjustment in step
4
.
7.
Set the monitor’s BLUE CHECK function to OFF to switch
the monitor back to the standard screen (R, G and B will all
appear).
8.
Use the monitor's brightness control to adjust so that the
color bars
H
and
I
disappear but
J
is visible.
6-3 Viewfinder Adjustment
6-4 External Monitor Adjustment
BRIGHT
3.
3.
2.
1.
1.
1.
Eyepiece
CONT
2.
Eyepiece
focusing ring
Color video monitor
LINE OUT
Y/C OUT
CH-1
CH-2
MONITOR OUT
POWER
ON
OFF
VTR
3.~8.
1.
2.
e08_dv5100u(47_53)e.p65
12/15/04, 3:53 PM
48
