10
2. CONTROLS, INDICATORS AND CONNECTORS
2-1 Front Section
VF
ZEBRA
AUDIO
LEVEL CH-1
OFF
ON
SKIN
AREA
AUTO
WHITE
ACCU
FOCUS
VTR
5
q
w
e
r
i
u
o
!0
y
t
The provided microphone is a phantom microphone. Please
confirm that the FRONT MIC +48V switch is set to the “ON”
side when the provided microphone should be used.
When using a microphone other than a phantom
microphone, first set the FRONT MIC +48V switch to “OFF”
before connecting the microphone.
CAUTION:
1
Viewfinder mount base, sliding securing ring
Mount the viewfinder on the base and secure it using the
sliding securing ring.
☞
See “Attaching the Viewfinder” on page 32.
2
[VF] Viewfinder connector (6-pin)
Connect the cable from the viewfinder here.
3
[FRONT MIC IN] Front microphone input
connector (XLR 3-pin)
Balanced 3-pin connector for camera microphone.
●
Set the FRONT MIC +48V switch
!
on page 16 in
accordance with the connected device.
●
To record the audio from this connector, set the CH-1/
CH-2 AUDIO IN switch
0
on page 16 to “FRONT”.
☞
See page 16.
4
[LENS] Lens control connector
Connect 12-pin lens control cable from lens here.
5
[ZEBRA] Switch
When this switch is ON, a zebra pattern is imposed on the
viewfinder or LCD areas having luminance levels in
accordance with the menu settings made for the video
signal. This pattern can be used as a reference for manual
adjustment of the lens iris. Zebra patterns are also displayed
during color bar display when this switch is set to ON.
☞
See “Zebra Pattern Display during Manual Adjustment”
on page 89.
●
The default value is 70% - 80%. The luminance level can
be changed with the ZEBRA setting in the LCD/VF menu
screen.
☞
See “ZEBRA” item on page 81.
While this switch is pressed to the SKIN AREA side, the
color tone areas specified with the SKIN COLOR ADJUST
item on the ADVANCED PROCESS menu are indicated in
the viewfinder. The switch returns to the OFF position when
released.
☞
See “How to Use Skin Detail” on page 94.
●
The Skin Detail color tone areas are not indicated while
the color bar or VTR playback picture is shown in the
viewfinder or on the LCD monitor.
6
[VTR] VTR trigger button (record start/stop button)
Recording start/stop can be done with this button.
(It is interlocked with the VTR trigger button on the side
section and the VTR trigger button on the lens section.)
7
[AUDIO LEVEL CH-1] CH-1 audio level control
Adjusts the audio level of the CH-1 audio signal input.
Normally, the camera is used with the control set to the
maximum (10) position.
●
To use this control, set the CH1 FRONT VR item on the
AUDIO/VIDEO menu screen to “ENABLE”.
☞
See “AUDIO/VIDEO menu screen” on page 79 .
Pin No.
Function
Pin No.
Function
1
Return switch
7
Iris position
2
VTR trigger
8
IRIS A/R INPUT
3
GND
9
EXTENDER position
4
Lens AUTO/MANU control
10
ZOOM position
5
IRIS control
11
—
6
+12V DC
12
—
1
2
3
Pin No.
Function
1
GND
2
HOT
3
COLD
e02_3_dv5100u(09_11)e.p65
12/15/04, 3:50 PM
10
