22
LCD BRIGHT
To adjust the brightness of the LCD monitor,
perform the following steps quickly (within approx.
1 second by each interval):
1)
Select “LCD BRIGHT” in SYSTEM MENU. The
“BRIGHT ON” message appears.
2)
Press the BRIGHT Wheel
1
in to return to
normal screen.
3)
Rotate the BRIGHT Wheel
1
to display the
bright level indicator
h
.
4)
Rotate the BRIGHT Wheel
1
until the
appropriate brightness is reached. After the
BRIGHT Wheel
1
is released, the indicator
soon disappears and adjustment is completed.
DEMO MODE
Demonstrates certain functions automatically.
Available when the Power Switch
@
is set to “
”
or “
” and “DEMO MODE” is set to “ON” (factory-
preset). Performing any operation during the
demonstration stops the demonstration
temporarily. Set to OFF to stop completely.
• When a tape whose erase protection tab is in the
position that allows recording is loaded in the
camcorder, demonstration is not available.
• If you do not detach the Lens Cap, you cannot
see the actual changes of the Automatic
Demonstration activated on the LCD monitor or
viewfinder.
DATE/TIME
Allows you to set the current date and time.
(
pg. 7)
GR-SXM260_17-22_EN
17/11/03, 2:59 PM
22
