26
EN
F
O
C
U
S
B
A
C
K
L
IG
H
T
EXP
OSURE
RECORDING
Advanced Features For Video And D.S.C. (cont.)
Dual Shooting
Lets you record images on a tape and store still images in a
MultiMediaCard simultaneously. In other words, it is
possible to store still images in the MultiMediaCard
without interrupting image recording on the tape.
1
Set the
POWER
Switch to “
” while pressing
down the Lock Button located on the switch and the
MODE
Dial to “
DUAL
” . Pull out the viewfinder fully
or open the LCD monitor fully.
2
While recording to a tape, press
SNAPSHOT
halfway.
A still image is displayed in the lower right corner of
the screen where the video image being recorded is
displayed.
•At this moment, if you release
SNAPSHOT
,
snapshot recording will be canceled.
3
Press
SNAPSHOT
fully. The displayed still image is
stored in the MultiMediaCard.
NOTES:
●
If
SNAPSHOT
is pressed in the Record-Standby mode,
only a still image is stored in the MultiMediaCard. Video
recording does not take place.
●
If
SNAPSHOT
is pressed when “DIS” is set to “ON”
(
pg. 30), the Stabilizer will be disabled.
●
The Stabilizer is less effective in the DUAL mode than in
other modes.
●
The flash is disabled during video recording.
●
Still images are stored in the MultiMediaCard in VGA
mode file size (
pg. 17).
●
When the
MODE
Dial is set to “DUAL”, all Fade/Wipe
Effects and some Program AE with special effects cannot
be used (
pg. 36 – 38).
MODE Dial
Operation
Switch
Lock Button
FOCUS
Button
(
3
)
SNAPSHOT Button
MENU Wheel
Video image
Half-pressed
position
Still image
Fully-pressed
position
Released position
POWER Switch
