20
EN
FULL
Snapshot mode with
no frame*
PIN-UP
Pin-Up mode
1
R
S
Z
S
G
B
I
D
R
E
O
O
N
A
E
D
E
E
C
U
O
A
I
E
M
C
T
N
M
P
N
P
N
O
A
U
M
D
/
U
.
M
R
O
M
U
T
M
E
N
D
M
O
P
A
B
M
R
E
O
D
L
E
O
A
D
E
L
R
D
E
Y
E
ME
F
P
N
U
I
U
L
N
L
–UP
RECORDING
Basic Recording For Video (cont.)
Snapshot (For Video Recording)
This feature lets you record still images that look like
photographs onto a tape.
SNAPSHOT MODE SELECTION
1
Set the
POWER
Switch to “
” while pressing
down the Lock Button located on the switch and the
MODE
Dial to “VIDEO” or “
”, then set the
Operation Switch to “
”. Pull out the viewfinder fully
or open the LCD monitor fully.
2
Press the
MENU
wheel. The Menu Screen appears.
3
Rotate the
MENU
wheel to select “
”. Press it and
“CAMERA MENU” appears.
4
Rotate the
MENU
wheel to select “SNAP MODE”, then
press it.
5
Rotate the
MENU
wheel to select the desired Snapshot
mode, then press it.
Rotate the
MENU
wheel to select “
1
RETURN” and press
it twice. The Menu Screen closes.
SNAPSHOT RECORDING
1
Press
SNAPSHOT
.
If you press during Record-Standby . . .
..... “PHOTO” appears and a still image will be recorded
for approx. 6 seconds, then the camcorder re-enters
the Record-Standby mode.
If you press during Recording . . .
..... “PHOTO” appears and a still image will be recorded
for approx. 6 seconds, then the normal recording
resumes.
• To use the flash,
pg. 32.
Motor Drive Mode
Keeping
SNAPSHOT
pressed provides an effect similar to
serial photography. (Interval between still images: approx. 1
second)
Display
SNAPSHOT Button
MODE Dial
Operation
Switch
POWER Switch
MENU Wheel
Menu Screen
NOTES:
●
To remove the shutter sound,
“BEEP/TALLY” on pg. 29.
●
If Snapshot recording is not possible, “PHOTO” blinks when
SNAPSHOT
is pressed.
●
If Program AE with special effects (
pg. 38) is engaged,
certain modes of Program AE with special effects are
disabled during Snapshot recording. In such a case, the icon
blinks.
●
If
SNAPSHOT
is pressed when “DIS” is set to “ON”
(
pg. 30), the Stabilizer will be disabled.
●
To dub images recorded on a tape to a MultiMediaCard,
pg. 65.
●
To reduce the Red-Eye effect in the subject’s eyes when the
flash fires,
pg. 32.
●
During playback as well, all snapshot modes are available
when “
COPY” is set to “OFF” in the Menu
Screen (
pg. 43).
●
When a headphone set is connected to the headphone
connector, the shutter sound is not heard from the speaker,
however it is recorded onto the tape.
*
There is the sound effect of a shutter closing.
When the
MODE
Dial is set to “
”, snapshot
recording will be performed with higher quality
(
pg. 24).
Lock Button