EN
35
1
Turn the Power dial to “
M
”.
•Hold the Lock button down while turning the
Power dial.
2
Press the Iris button, and then press the
w
e
button within two seconds.
•Press the
w
e
button repeatedly to cycle
through the following modes:
PROGRAM
→
F2.8/3.8
→
F5.6
→
F8
→
F11
→
PROGRAM
•The F value is the iris value, which controls
the amount of light that reaches the camera’s
image sensor.
•Smaller the F value is, faster the shutter speed
becomes. Larger the F value is, slower the
shutter speed becomes.
•Larger the F value is, deeper the depth of
field becomes.
•In PROGRAM mode, the iris value and the
shutter speed are calculated and set auto-
matically by the camera.
3
Point the lens at the subject and half-press the
Shutter button.
•The camera will continue to focus on the
subject while the button is half-pressed.
The shoot standby lamp (green) flashes.
•To display the image on the LCD screen
while shooting, press the DSP button.
4
Press the Shutter button all the way to take
the picture.
NOTE:
●
When shooting a night scene, select “ ” for
“W. BALANCE”. (
Z
pg. 38)
2
1
OFF
M
4
SET
V
3,4
Iris Setting
You can adjust the depth of field and the shutter speed by setting the F value manually.
Содержание GC X 1
Страница 1: ...GC X1 DIGITAL STILL CAMERA INSTRUCTIONS ENGLISH STILL CAMERA LYT0544 001C EN ...
Страница 10: ...10EN CONTROLS CONNECTORS AND INDICATORS 1 2 4 5 6 7 8 9 0 3 Front View Top View 1 4 2 3 ...
Страница 12: ...12EN 1 2 3 CONTROLS CONNECTORS AND INDICATORS cont 6 8 9 7 0 2 3 1 4 5 Rear View Bottom View ...
Страница 91: ...MEMO ...
