3
To prevent short circuits, we recommend that you disconnect the battery’s negative terminal and make all
electrical connections before installing the unit.
• Be sure to ground this unit to the car’s chassis again after installation.
Typical connections
Before connecting:
Check the wiring in the vehicle carefully. Incorrect connection may cause serious
damage to this unit.
The leads of the power cord and those of the connector from the car body may be different in color.
1
Connect the colored leads of the power cord in the order specified in the illustration below.
2
Connect the antenna cord.
3
Finally connect the wiring harness to the unit.
15 A fuse
Rear ground terminal
To an external component
(see diagram )
To parking brake (see diagram )
Yellow
*
4
USB cable (see diagram )
To metallic body or chassis of the car
To a live terminal in the fuse block connecting to the car battery
(bypassing the ignition switch) (constant 12 V)
To an accessory terminal in the fuse block
To automatic antenna if any (250 mA max.)
Fuse block
Red
To car light control switch
To cellular phone system
To the remote lead of other equipment (200 mA max.)
Ignition switch
White with black stripe
White
Gray with black stripe
Gray
Green with black stripe
Green
Purple with black stripe
Purple
Left speaker (front)
Right speaker (front)
Left speaker (rear)
Right speaker (rear)
PRECAUTIONS on power supply and speaker connections:
• DO NOT connect the speaker leads of the power cord to the car battery; otherwise, the
unit will be seriously damaged.
• BEFORE connecting the speaker leads of the power cord to the speakers, check the speaker wiring in
your car.
ELECTRICAL CONNECTIONS
Black
Blue
Blue with white stripe
Orange with white stripe
Light green
Brown
*
3
Not included for this unit
*
4
Before checking the operation of this unit prior to
installation, this lead must be connected, otherwise
power cannot be turned on.
Fan
Insta_KDAVX44[A]1.indb 3
Insta_KDAVX44[A]1.indb 3
08.2.4 10:18:46 AM
08.2.4 10:18:46 AM