ENGLISH
66
Sound signals emitted through the rear terminals
Through the analog terminals (Speaker out/LINE OUT)
2-channel signal is emitted. When playing multi-channel encoded disc, multi-channel signals are downmixed.
• DTS sound cannot be reproduced.
Through the DIGITAL OUT (optical) terminal
Digital signals (Linear PCM, Dolby Digital and MPEG Audio) are emitted.
• To reproduce the multi-channel sounds such as Dolby Digital and MPEG Audio, connect an amplifier or a decoder
compatible with these multi-channel sources to this terminal, and set <D. Audio Output> correctly. (
☞
page 55)
• DTS sound cannot be emitted.
<D. Audio Output>
Playback disc
Output signals
<PCM Only>
<Dolby Digital>
<Stream>
DVD
48 kHz, 16/20/24 bits Linear
PCM
48 kHz, 16 bits stereo Linear PCM
*
96 kHz, Linear PCM
48 kHz, 16 bits stereo Linear PCM
with
Dolby Digital
48 kHz, 16 bits
stereo Linear PCM
Dolby Digital bitstream
with
MPEG Audio
48 kHz, 16 bits stereo Linear PCM
MPEG bitstream
Audio CD, Video CD
44.1 kHz, 16 bits stereo Linear PCM /
48 kHz, 16 bits stereo Linear PCM
DivX/MPEG
with
Dolby Digital
48 kHz, 16 bits
stereo Linear PCM
Dolby Digital bitstream
with
MPEG Audio
32/44.1/48 kHz, 16 bits Linear PCM
MP3/WMA
32/44.1/48 kHz, 16 bits Linear PCM
WAV
44.1 kHz, 16 bits Linear PCM
*
Digital signals may be emitted at 20 or 24 bits (at their original bit rate) through the DIGITAL OUT terminal if the discs
are not copy-protected.
EN_KDAVX4020[E]5.indb 66
EN_KDAVX4020[E]5.indb 66
08.12.25 4:38:27 PM
08.12.25 4:38:27 PM