SETTINGS
57
ENGLISH
Equalizer
Flat/Hard Rock/R&B/Pop/Jazz/Dance/Country/Reggae/Classic/User1/User2/User3
,
☞
[50]
Sound
Menu items
Selectable settings, [reference page]
Fader/Balance
Adjust fader—speaker output balance between the front and rear speakers.
• Upmost—front only
• Downmost—rear only
When using a two-speaker system, set the fader to the center (
00
).
Adjust balance—speaker output balance between the left and right speakers.
• Leftmost—left only
• Rightmost—right only
Volume Adjust
Adjust and store auto-adjustment volume level for each source, comparing to
the FM volume level. The volume level will automatically increase or decrease
when you change the source.
–12
to
+12
; Initial
00
• For digital sources: You can make the adjustments separately depending on
the audio format—Dolby Digital and the others.
Subwoofer Level
Adjust the subwoofer output level.
–06
to
+08
; Initial
00
High Pass Filter
Through:
Select when the subwoofer is not connected.
On:
Select when the subwoofer is connected.
Crossover
Adjust the crossover frequency between the front/rear speakers and the
subwoofer.
80Hz, 120Hz, 150Hz
Amplifier Gain
You can change the maximum volume level of this unit.
Off:
Deactivates the built-in amplifier.
Low Power:
Select this if the maximum power of the speakers is less than
50 W.
High Power
*
1
Not selectable when “AV Input” is selected as the source.
*
2
The REVERSE GEAR SIGNAL lead connection is required
☞
“Installation/Connection Manual.” The rear view through
the camera appears on the monitor in “Full” aspect ratio (regardless of the aspect ratio setting) when you shift the
gear to the reverse (R) position.
*
3
Not selectable when the component connected to the CD changer jack is selected as the source.
*
4
The name of the component detected through the CD changer jack is shown.
*
5
The TEL MUTING lead connection is required.
☞
“Installation/Connection Manual.“
Adjusts fader
Adjust balance
EN_KDAVX4020[E]5.indb 57
EN_KDAVX4020[E]5.indb 57
08.12.25 4:38:23 PM
08.12.25 4:38:23 PM