background image

2

Safety Precautions

CAUTION:

  

To reduce the risk of electric shock. Do 
not remove cover (or back). No user 
serviceable parts inside. Refer servicing 
to qualified service personnel. 

RISK OF ELECTRICAL SHOCK

DO NOT OPEN

The lightning flash with arrowhead 
symbol, within an equilateral triangle is 
intended to alert the user to the presence 
of uninsulated “dangerous voltage” 
within the product’s enclosure that may 
be of sufficient magnitude to constitute a 
risk of electric shock to persons.  

The exclamation point within an 
equilateral triangle is intended to alert 
the user to the presence of important 
operating and maintenance (servicing) 
instructions in the literature 
accompanying the appliance.  

CAUTION

POWER CONNECTION

The power supply voltage rating of this product is AC 120 V 
(For U.S.A. and Canada) and AC 220 – 240 V (For European 
countries, Asian countries, and United Kingdom).
The power cord attached conforms to the following power supply 
voltage and countries. Use only the power cord designated to 
ensure safety and EMC regulations of each country.

Not all types of power cords are supplied to this product.

For U.S.A. and Canada: 
AC 120 V

For European and 
Asian countries: 
AC 220 – 240 V

For United Kingdom: 
AC 220 – 240 V

This plug will fit only into a grounded power outlet. If you are 
unable to insert the plug into the outlet, contact your electrician to 
install the proper outlet. Do not defeat the safety purpose of the 
grounded plug.

This product should be operated only with the type of power 
source indicated on the label. If you are not sure of the type of 
power supply of your home, consult your product dealer or local 
electric power company.

Warning:

Do not use the same power cord for AC 120 V as for AC 220 – 
240 V. Doing so may cause malfunction, electric shock or fire.

Under the following conditions,
1.  Turn off the power.
2.  Unplug this product from the wall outlet.
3.  Refer service to qualified service personnel.

a)  When the product emits smoke or unusual smell.
b)  When the product exhibits a distinct change in performance

 —for example, no picture or no sound.

c)  If liquid has been spilled, or objects have fallen on the product.
d)  If the product has been exposed to rain or water.
e)  If the product has been dropped or damaged in any way.
f)  When the power supply cord or plug is damaged.

Do not install this product in the following places:

in a damp or dusty room
where the product is exposed to soot or steam, such as 
near the cooking counter or a humidifier 
near heat sources
where condensation easily occurs, such as near the 
window
in a location exposed to direct sunlight or strong light

Do not place this product on an unstable cart, stand, or table. 
The product may fall, causing serious injury to a child or adult, 
and serious damage to the product.
The product should be mounted according to the 
manufacturer’s instructions, and should use a mount 
recommended by the manufacturer.
Do not use this product near water.
Be sure to install the product in the place where proper 
temperature and humidity are kept (

 “Operation environment” 

on page 28).
This product becomes hot during its use. Take enough care 
when handling the product.




Note for United Kingdom power cord only

The plug of United Kingdom power cord has a built-in fuse. When 
replacing the fuse, be sure to use only a correctly rated approved type, 
re-fit the fuse cover. (Consult your dealer or qualified personnel.)

How to replace the fuse

Open the fuse compartment with the 
blade screwdriver, and replace the 
fuse.

Fuse

Warning:

  This is a class A product. In a domestic environment this 

product may cause radio interference in which case the 
user may be required to take adequate measures.

Before connecting other products such as VCR’s and personal 
computers, you should turn off the power of this product for 
protection against electric shock.
Do not use attachments not recommended by the 
manufacturer as they may be hazardous.

When replacement parts are required,

 be sure the service 

technician has used replacement parts specified by the 
manufacturer or equivalents. Unauthorized substitutions may 
result in fire, electric shock, or other hazards.

Upon completion of any service or repairs to this product,

 

ask the service technician to perform safety checks to 
determine that the product is in proper operating condition.

WARNING:

 TO REDUCE RISK OF FIRE OR ELECTRIC SHOCK, 

DO NOT EXPOSE THIS APPARATUS TO RAIN OR 
MOISTURE. NO OBJECTS FILLED WITH LIQUIDS, SUCH 
AS VASES, SHALL BE PLACED ON THE APPARATUS.

IMPORTANT SAFEGUARDS

Electrical energy can perform many useful functions. This unit has 
been engineered and manufactured to assure your personal safety. 
But 

IMPROPER USE CAN RESULT IN POTENTIAL ELECTRIC 

SHOCK OR FIRE.

 In order not to defeat the safeguards incorporated 

into this product, observe the following basic rules for its installation, 
use, and service. Please read these “IMPORTANT SAFEGUARDS” 
carefully before use.

All the safety and operating instructions should be read before the 
product is operated.
The safety and operating instructions should be retained for future 
reference.
All warnings on the product and in the operating instructions should 
be adhered to.
All operating instructions should be followed.

DTV21G11̲LCT2681.indb   2

DTV21G11̲LCT2681.indb   2

12.2.5   10:16:28 AM

12.2.5   10:16:28 AM

Содержание DT-V21G11Z

































Отзывы: