JVC CH-X400, Руководство по обслуживанию

Страница: 21 / 59

CH-X400/CH-X450
1-21
Tray extension
error
Tray-in switch time out
(Tray-in switch Low, Tray-out switch High) Tray stops part way E1 03 00 11
Tray stops part way E1 03 00 12 Tray-out switch time out (Tray-in switch High,
Tray-out switch High)
Tray-in switch faulty or other defect E1 03 00 13 Tray-in switch time out (Tray-in switch Low,
Tray-out switch Low)
Tray motor inoperative E1 03 00 16 Tray-in switch time out (Tray-in switch Low,
Tray-out switch Low)
Tray retraction stops part way E1 03 00 17 Tray-out switch time out (Tray-in switch High,
Tray-out switch High)
Tray-in switch faulty or other defect E1 03 00 18 Tray-in switch time out (Tray-in switch Low,
Tray-out switch Low)
Magazine removed when tray partly r
etracted E1 03 00 19 MAG-in switch Low to High
E1 03 00 47 Not stable at absolute position Absolute position time out
E1 03 00 46 Both Tray-in and Tray-out Low Mechanism switch time out
E1 02 00 43 Magazine not ejected MAG in switch time out
E1 02 00 42 Eject position not attained Eject position time out
E1 02 00 41 Position motor inoperative Eject position time out
E1 02 00 38 Other fault Wait position time out
E1 02 00 37 Position not stable in fine adjust mode Wait position time out
E1 02 00 36 Position motor inoperative Wait position time out
E1 02 00 33 Other fault Play position time out
E1 02 00 32 Position not stable in fine adjust mode Play position time out
E1 02 00 31 Position motor inoperative Play position time out
E1 02 00 28 Other fault Wait position time out
E1 02 00 27 Position not stable in fine adjust mode Wait position time out
E1 02 00 26 Position motor inoperative Wait position time out
E1 02 00 23 Other fault Wait position time out
E1 02 00 22 Position not stable in fine adjust mode Wait position time out
E1 02 00 21 Position motor inoperative Wait position time out
E1 03 00 14 Magazine removed when tray partly
extende MAG-in switch Low to High
Tray retraction
error
Lifter raise error
Lifter lower error
Chuck error
Unchuck error
Eject error
Initialize error
Generating condition Description Error code
CH-X400 & CX-H450 Error code
The following error codes can be displayed and stored in up to 3 memories when the KD-MX3000 is used with
the controller. Refer to the KD-MX3000 service manual regarding error code indication.
The error code indication when using the earlier controller is the same as the CH-X99,KD-MK88 and other
12CD changer models.
CH-1 error code table
Note: The 1st error code is indicated by E1, while the 2nd and 3rd error codes are respectively indicated by
E2 and E3.
www. xiaoyu163. com
QQ 376315150
9 9
2
8 9
4 2
9 8
TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3
Q Q
TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299
http://www.xiaoyu163.com
http://www.xiaoyu163.com