CH-X400/CH-X450
1-19
JC12 Forced eject procedures
Magazine eject does not function.
Completed
Completed
Press the magazine lock lever to
eject the magazine.
Rotate the third gear clockwise
until the lifter level is below the 9th
tray position.
Place the unit with its left side
facing down and apply a slight
shock, then return the tray to the
magazine.
Disconnect the tray from the hook.
Rotate the third gear clockwise and
unchuck the disc.
Remove the dampers and the top
cover to take out the mechanism.
Remove the item(s) causing the
disc-jam through the clearance at
the top of the lifter.
Remove the lifter bracket (L) and
return the tray to the magazine.
RESET (Press EJECT for 3 sec.)
Completed
YES
YES
YES
NO
NO
NO
Remove the bottom cover
Is the disc set in the playing
position?
Are trays stored in
the magazine?
Check visually.
Improperly positioned
Peel off the sticker on the left side
of the unit. Insert a screwdriver
and press the internal lever to
forcibly eject the magazine.
Check that the trays remain no more
than 10 mm inside the magazine.
www. xiaoyu163. com
QQ 376315150
9
9
2
8
9
4
2
9
8
TEL 13942296513
9
9
2
8
9
4
2
9
8
0
5
1
5
1
3
6
7
3
Q
Q
TEL 13942296513 QQ 376315150 892498299
TEL 13942296513 QQ 376315150 892498299
