background image

23

English

Maintenance

To get the best performance from the unit, keep your discs, tapes, and mechanism clean.

Handling cassette tapes

• If the tape is loose in its cassette,

take up the slack by inserting a
pencil in one of the reels and
rotating.

• If the tape is loose, it may get

stretched, cut, or caught in the
cassette.

• Be careful not to touch the tape

surface.

• Avoid storing tapes in the following

places:
—In dusty places
—In direct sunlight or heat
—In moist areas
—On a TV or speaker
—Near a magnet

To keep the best recording and playback sound
quality

If the heads, capstans, and pinch rollers of the cassette
deck become dirty, the following will occur:
• Impaired sound quality
• Discontinuous sound
• Fading
• Incomplete erasure
• Difficulty in recording

To clean the heads, capstans, and pinch rollers

Use a cotton swab moistened with alcohol.

To demagnetize the heads

Turn off the unit, and use a head demagnetizer
(available at electronics and audio shops).

Cleaning the unit

• Stains on the unit

Should be wiped off with a soft cloth. If the unit is
heavily stained, wipe it with a cloth soaked in water-
diluted neutral detergent and wrung well, then wipe
clean with a dry cloth.

• Since the unit may deteriorate in quality, become

damaged or have its paint peel, be careful about
the following:

—DO NOT wipe it with a rough cloth.
—DO NOT wipe it strongly.
—DO NOT wipe it with thinner or benzine.
—DO NOT apply any volatile substances such as

insecticides to it.

—DO NOT allow any rubber or plastic to remain in

contact with it for a long time.

Handling discs

• Remove the disc from its case by

holding it at the edge while
pressing the center hole lightly.

• Do not touch the shiny surface of

the disc, or bend the disc.

• Put the disc back in its case after

use to prevent warping.

• Be careful not to scratch the

surface of the disc when
placing it back in its case.

• Avoid exposure to direct

sunlight, temperature extremes,
and moisture.

To clean the disc

Wipe the disc with a soft cloth
in a straight line from center to
edge.

DO NOT use any solvent—such as conventional
record cleaner, spray, thinner, or benzine—to clean
the disc.

Heads

Capstans

Pinch Rollers

EN18-24_UX-H30[UW]f.pm6

03.3.12, 3:44 PM

23

Содержание CA-UXH30





























































Отзывы: