JVC CA-UXH30 Скачать руководство пользователя страница 2

Страница: 2 / 60

G-1

Warnings, Cautions and Others

CAUTION—

(standby/on) button!

Disconnect the mains plug to shut the power off completely (all
lamps and indications go off). The

(standby/on) button in

any position does not disconnect the mains line.
• When the unit is on standby, the STANDBY lamp lights red.
• When the unit is turned on, the STANDBY lamp goes off.

The power can be remote controlled.

CAUTION

To reduce the risk of electrical shocks, fire, etc.:
1. Do not remove screws, covers or cabinet.
2. Do not expose this appliance to rain or moisture.

CAUTION

• Do not block the ventilation openings or holes.

(If the ventilation openings or holes are blocked by a
newspaper or cloth, etc., the heat may not be able
to get out.)

• Do not place any naked flame sources, such as

lighted candles, on the apparatus.

• When discarding batteries, environmental problems

must be considered and local rules or laws
governing the disposal of these batteries must be
followed strictly.

• Do not expose this apparatus to rain, moisture,

dripping or splashing and that no objects filled with
liquids, such as vases, shall be placed on the
apparatus.

SAFETY_UX-H30[U]f.pm6

03.4.7, 6:05 PM

Содержание CA-UXH30





























































Результаты поиска

Содержание CA-UXH30

Отзывы:

Бренды по названию

Популярные бренды

JVC CA-UXH30, Инструкция по эксплуатации

Результаты поиска

Содержание CA-UXH30

Отзывы:

Бренды по названию

Популярные бренды