JVC CA-UXH30, Инструкция по эксплуатации

Страница: 22 / 60

19
English
Disc Direct Recording
Everything on the disc goes onto the tape in the order it
is on the disc, or according to the order you have set in
Program Play.
On the unit ONLY:
1
Put a recordable cassette in with the
exposed part of the tape down.
2
Load a disc.
• If the current playing source is not the CD
player, press
3
/
8
CD, then
7
before going to
the next step.
— If you do not want pauses of about 4 seconds
recorded between selections, press
3
/
8
CD
twice. Otherwise, a non-recorded pause will
be automatically inserted between selections.
• If you want to record on both sides of a tape, see
“To record on both sides—Reverse Mode.”
3
Press ONE TOUCH
REC (recording).
The
REC
(recording) indicator
lights up on the display and recording starts.
After recording, the CD player and cassette deck
automatically stop.
To stop while recording, press
7
.
The tape stops after 4 seconds.
To remove the cassette, press
)
on the
unit.
To record on both sides—Reverse Mode
On the remote control ONLY:
Press REV.MODE (reverse mode)
repeatedly until
or is lit.
• When using the Reverse Mode for Disc
Direct Recording, lights up and start
recording in the forward (
3
) direction first. When
the tape reaches its end while recording a song in the
forward direction (
3
), the last song will be re-
recorded at the beginning of the reverse side (
2
).
If you start recording on the reverse side (
2
),
recording will stop when recording is done only on
one side (reverse) of the tape.
When making Sleep Timer settings while doing
Disc Direct Recording
Set enough time to allow for the disc to finish playing;
otherwise, the power will go off before recording is
completed.
One Track Recording
This recording method is convenient when you record
tracks while playing the disc. You can record just your
favorite songs on the tape.
On the unit ONLY:
1
Put a recordable cassette in with the
exposed part of the tape down.
2
Play the track on the disc you wish to
record.
3
Press ONE TOUCH
REC (recording).
The CD player returns to the
beginning of that track and the track is recorded on
the tape.
After recording, the CD player and cassette deck
automatically stop.
4
Repeat steps
2
and
3
to record other
tracks you want.
To stop while recording, press
7
.
The tape stops after 4 seconds.
To remove the cassette, press
)
on the
unit.
ONE TOUCH
REC
REV.MODE
ONE TOUCH
REC
EN18-24_UX-H30[U]f.pm6 03.4.7, 11:51 AM 19