JVC CA-UXH30, Инструкция по эксплуатации

Страница: 50 / 60

17
English
Playing Back Tapes
You can play back type I tapes.
Playing Back a Tape
1
Press
)
for cassette deck on the unit.
The cassette holder opens.
2
Put a cassette in with the exposed part
of the tape down.
3
Close the cassette holder cover gently.
4
Press
2 3
TAPE.
The unit automatically turns on and
the tape starts playing. The tape
direction indicator (
3
or
2
) flashes
slowly on the display.
• Each time you press the button, the tape
direction changes:
3
: plays the front side.
2
: plays the reverse side.
When the tape plays to the end, the deck
automatically stops if the Reverse Mode is set to
or . (See “To play both sides—Reverse
Mode.”)
If no cassette is inserted when you press
2 3
TAPE
“NO TAPE” appears on the display.
To stop playing, press
7
.
To fast-wind to the left or to the
right,
press
¢
or
4
while the
tape is not running.
The tape direction indicator (
3
or
2
)
starts flashing rapidly on the display.
To remove the cassette, press
)
on
the unit.
To play both sides—Reverse Mode
You can set the deck to play just one side of a tape,
both sides once, or both sides continuously.
On the remote control ONLY:
Press REV.MODE (reverse mode).
• Each time you press the button, the
Reverse Mode changes as follows:
: The deck automatically stops after playing
both sides of the tape. Stops when playback
in the
2
direction is finished.
: The deck continues to play both sides of the
tape until
7
is pressed.
: The deck automatically stops after playing
one side of the tape.
The use of C-120 or thinner tape is not
recommended, since characteristic
deterioration may occur and this tape easily
jams in the pinch-rollers and the capstans.
REV.MODE
TAPE
EN14-17_UX-H30[UW]f.pm6 03.3.12, 3:41 PM 17