JVC BR-DV6000E, Инструкция по эксплуатации

Страница: 52 / 106

E-52
INDEX+1
BR-DV6000
PROFESSIONAL
MENU RESET
DISP
SET
BLANK CUE UP HOLD
PHONES REC LEVEL
CH-1/3 CH-2/4
MIC
SEARCH–
Mini
BR-DV6000
PROFESSIONAL
MENU RESET
DISP
SET
BLANK CUE UP HOLD
PHONES REC LEVEL
CH-1/3 CH-2/4
MIC
SEARCH–
Mini
BLANK SEARCH
PLAYBACK
– Search function –
Index search
This function searches to the position where the index signal is recorded.
: Setting :
Set “
;
,
:
” KEY FUNC in the SYSTEM (1/2) Menu screen to IN-
DEX.
: Operation :
䡵
To search an index point in the forward direction from
the current tape position:
• Press the button.
The index position to be searched can be specified by the number
of times this button is pressed. (Max: 99)
䡵
To search an index point in the reverse direction from
the current tape position:
• Press the SEARCH – button.
The index position to be searched can be specified by the number
of times this button is pressed. (Max: 99)
䡵
When the or SEARCH – button is pressed,
the unit fast-forwards or rewinds to the specified in-
dexed position and start playing.
Blank search
This function searches unrecorded parts of the tape.
Index search progressing:
displayed on the screen
(The number denotes the
corresponding index position.)
Monitor screen
Memo
●
If the interval between index signals is less than one minute, the
function may not work well.
●
The specifications for index signal recording varies with the device
used.
Monitor screen
䡵
In the STOP mode, press the BLANK button.
¥
• If the current position is at a recorded part of the tape, BR-
DV6000 fast-forwards until an unrecorded part is reached
and stops there.
• If the current position is an unrecorded part of the tape, BR-
DV6000 will first advance the tape in the forward direction
for confirmation and thereafter rewind and go into the STILL
mode at the last recorded position.
• During a blank search, “BLANK SEARCH” is displayed on
the monitor.
Blank search
BLANK button
SEARCH–
button
button
DV6000E_52-071_Eng.p65e 06/03/03, 3:29 PM 52