JVC AV-48WP55/H Скачать руководство пользователя

Страница: 21 / 69

(No.YA097)1-21

3.2.14 MAIN CHASSIS

• Take out the REAR PANEL.

(1) Remove 2 screws

[ S ]

(2) Remove 2 screws

[ P ]

(3) Pull out the MAIN CHASSIS for backside.

NOTE:

If necessary, remove the anode wires, connectors,
respectively.

3.2.15 MI-COM & DIST MODULE PWB

• Take out the REAR PANEL.
• Take out the MAIN CHASSIS.

(1) Disconnect the connector

[ CN000E ],

[ CN000Y ]

on the

MI-COM & DIST MODULE PWB.

(2) Remove 2 screws

[ T ]

(3) Take out the MI-COM & DIST MODULE PWB.

3.2.16 DIGITAL CONVERGENCE MODULE PWB

• Take out the REAR PANEL.
• Take out the MAIN CHASSIS.

(1) Remove 2 screws

[ U ]

(2) Take out the DIGITAL CONVERGENCE MODULE PWB.

Fig.9

3.2.17 PROJECTION UNIT

• Take out the SPEAKER GRILLE.
• Take out the FRONT CONTROL BOX.
• Take out the REAR PANEL.
• Take out the MAIN UNIT.

(1) Take out the CRT SOCKET PWB.
(2) Remove 4 screws

[ V ]

(3) Pull out the PROJECTION UNIT upward.

NOTE :

• Refer to "PROJECTION UNIT REPLACEMENT" on page

1-12 when taking out and replacing the PROJECTION
UNIT.

• When wire clamps are removed during work, use care

to restore them precisely to their original positions.
Performance can be affected if these are not returned
to the original positions.

3.2.18 HV DIVIDER

• Take out the REAR PANEL.

(1) Remove 1 screw

[ W ]

(2) Take out the HV DIVIDER.

*Wires of the transformer (FBT) and CRT of each
PROJECTION UNIT can be removed by turning the
connector portions.

NOTE :

• If necessary, remove the anode wires, and replacing

the HV DIVIDER, take care to correctly engage the
connector.

3.2.19 REMOCON SENSOR PWB

• Take out the REAR PANEL.

(1) Disconnect the connector

[ R ]

(2) Remove 1 screw

[ X ]

(3) Take out the REMOCON SENSOR PWB.

Fig.10

MI-COM & DIST

MODULE PWB

DIGITAL CONVERGENCE

MODULE PWB

MAIN

CHASSIS

PROJECTION UNIT

CONNECTOR

Pull

Turn

REMOCON

SENSOR PWB

HV
DIVIDER

Содержание AV-48WP55/H






































































Результаты поиска

Содержание AV-48WP55/H

Отзывы:

Похожие инструкции для AV-48WP55/H

Бренды по названию

Популярные бренды

JVC AV-48WP55/H, Руководство по обслуживанию и список запасных частей

Результаты поиска

Содержание AV-48WP55/H

Отзывы:

Похожие инструкции для AV-48WP55/H

Бренды по названию

Популярные бренды