Connection/Installation
28
5) Adjust the direction of the microphone
(accessory
3
) to the driver.
3
Fix a cable with a commercial item of tape.
Ñ
Installing the main unit
NOTE
• Determine the slider position before installing the
main unit.
changed after installing to the vehicle.
• Make sure that the unit is installed securely in
place. If the unit is unstable, it may malfunction
(eg, the sound may skip).
1
Remove parts that interfere with
installing such as a panel on the vehicle.
2
Install the car bracket to the main unit.
Car bracket
4
or
5
Main unit
3
Connect the wiring harness wires and
peripheral equipment.
4
Install the main unit to the vehicle.
5
Reinstall the removed parts such as a
panel on the vehicle.
Panel on the
vehicle
Main unit
6
Install the display unit (accessory
8
) to
the main unit.
Main unit
8
NOTE
• If the display unit hits a panel on the vehicle,
adjust the display height by referring to
Adjusting the display height (P.27)
7
Fix the display unit with six hexagon head
screws (accessory
-
).
-
8
Attach the protective cover (accessory
=
)
to coupling part, and then fix it with two
binding head screws (accessory
~
).
~
=
NOTE
• If the protective cover (accessory
=
) is not attached,
this unit will not turn on. Even if the unit is turned
on, the power may be turned off halfway.
Be sure to attach the protective cover (accessory
=
).
9
Raise the display manually.
!B5K-0763-00_20KWV_K_FP_QSG.indb 28
2020/07/02 14:28
