JVC 0397MKV*UN*SN, Инструкция по эксплуатации

Страница: 24 / 68

24
EN
VIDEO CAPTURE
CAPTURING VIDEO IMAGES
There are three capture modes available: Step by Step, Program and Interval. The latter two
modes are available only when connected to a JLIP compatible video source unit. Step by Step
Capture mode must be used to capture images from a video source unit with no JLIP connector.
Image data flow
When storing full image data on a 2HD disk,
• An image saved in the bitmap data format can be stored on one disk.
• About 28 images saved in the JPEG video compression format can be stored on one disk.
This is the case when using floppy disks formatted for 1.44 MB.
NOTE:
•The index image is displayed in the
image display box.
•Each time the image display box is
double-clicked, the full image data (768
x 552 pixels) is displayed only after full
image data transfer is finished.
Video source
unit
Video signal
GV-DS1
(Image stored in video memory)
PC
(video data are stored on a hard disk or the like)
Full image data
(with a resolution of 768 x 552
pixels)
2 types of video data
•Bitmap data Approx. 1.3MB
•JPEG video compression data
Approx. 50 kB
Index image data
(with a resolution of
80 x 60 pixels)