JVC 0397MKV*UN*SN, Инструкция по эксплуатации

Страница: 57 / 68

EN
57
1. POWER button
• Turns the device on and off.
2. POSITION button
• Selects the position to store a scene in
memory for Multi-Print.
3. ID number
• Displays the selected device's ID
number.
4. Message display
• Displays the operating mode of the
selected device.
5. MULTI-PIX button
• Select by clicking (
¶
/
Ä
) button.
OFF : Single print
4
: 4 shots on one sheet
16 : 16 shots on one sheet
6. CONTENT button
• Select by clicking (
¶
/
Ä
) button.
STROBE : Stores the selected number of
images at short intervals, and
prints them all on one sheet.
SELECTED : Prints 4 or 16 selected scenes
on one sheet.
SAME : Prints the same scene 4 or 16
times on one sheet.
7. STROBE SPEED button
• Effective when "STROBE" is selected
from "CONTENT".
HIGH : When printing in the Strobe Print
mode, the GV-PT2 stores scenes
at intervals of approximately 1/
15 second.
LOW : When printing in the Strobe Print
mode, scenes are stored at
intervals of approximately 1/2
second.
8. PIX STABILIZER button
ON : If the scene you want to print is
jittery, select "ON" to stabilize it.
OFF : Usually set to "OFF".
9. STORE button
• Stores scenes and titles you want to
print in the video printer's memory.
10. PRINT button
When connected to the GV-PT2
• Print command is available.
11. SELECT (scene select) button
• Switches between "SOURCE" (images
from camcorder or VCR) and
"MEMORY" (scenes stored in memory)
for display on TV monitor.
12. CLOSE button
• Closes the "Video Printer" window.