Jura IMPRESSA J9 One Touch Скачать руководство пользователя страница 45

Страница: 45 / 52

8 Transport and environmentally friendly disposal

In order to protect the IMPRESSA from frost during transport, the
system must be emptied.

Precondition:

‘Please select product:’

is displayed.

Carefully pull the cappuccino frother down and off.

Place a receptacle under the connector of the cappuccino

frother.

Press the

‘1 portion milk’

button.

‘Machine is heating.’

As soon as the machine has heated up,

‘Please select pro-

duct:’

appears.

Press the

‘1 portion milk’

button again.

‘1 portion milk’

, hot steam is discharged from the connector.

Remove and empty the water tank.

Turn the Rotary Switch until

‘60 sec.’

is displayed.

Steam will continue to be discharged from the connector
until the system is empty.

‘Fill water tank’

Press the On/Off button.

The IMPRESSA is switched off.

Please dispose of old machines in an environmentally neutral way.

Transport / Emptying the
system

Disposal

Содержание IMPRESSA J9 One Touch





















































Результаты поиска

Содержание IMPRESSA J9 One Touch

Отзывы:

Похожие инструкции для IMPRESSA J9 One Touch

Бренды по названию

Популярные бренды

Jura IMPRESSA J9 One Touch, Инструкция по эксплуатации

Результаты поиска

Содержание IMPRESSA J9 One Touch

Отзывы:

Похожие инструкции для IMPRESSA J9 One Touch

Бренды по названию

Популярные бренды