background image

41

5 Maintenance

Coffee beans may be covered with a slight oil film which remains on 
the walls of the bean container. These traces may negatively affect 
the coffee result. For this reason clean the bean container from time 
to time.

Precondition: 

‘Fill bean container’

 is displayed.

  

Q

  

T

  Switch the machine off with the On/Off button.

  

3

  

T

  Switch the machine off at the power switch.

T

  Open the bean container cover and remove the aroma pres-

ervation cover.

T

  Clean the bean container with a soft, dry cloth.

T

  Fill the bean container with coffee beans, then close the 

aroma preservation cover and the bean container cover.

Limescale deposits may form in the water tank. To ensure correct 
function of the machine, descale the water tank from time to time.

T

  Remove the water tank.

T

  If you use a CLEARYL Blue filter cartridge, remove this.

T

  Descale the tank with a mild conventional descaling agent 

in accordance with the manufacturer's instructions.

T

  Rinse out the water tank thoroughly.

T

  If you use a CLEARYL Blue filter cartridge, insert this again.

T

  Fill the water tank with fresh, cold water and reinsert the 

tank.

Cleaning the bean 
container  

Descaling the water tank  

Содержание IMPRESSA J9 One Touch





















































Отзывы: