Jura IMPRESSA J9 One Touch, Инструкция по эксплуатации

Страница: 15 / 52

15
1 Preparing and using for the first time
T
Press the ‘ < ’ or ‘ > ’ button to set the water hardness.
T
Press the ‘Save’ button.
‘Saved’ appears briefly on the display to confirm the setting.
‘Maintenance settings (3/6)’
O T
Press the P button to exit programming mode.
‘Please select product:’
You can adjust the grinder on a continuous scale to suit the degree
of roast of your coffee.
If you adjust the consistency of grind when the grinder is not oper-
ating, the grinder adjustment switch could be damaged.
T
Only adjust the consistency of grind when the grinder is run-
ning.
The consistency of grind setting is correct if the coffee flows regu-
larly from the coffee spout. In addition a fine, thick crema forms.
Example: Proceed as follows to change the consistency of grind
during the preparation of an espresso.
T
Open the storage compartment cover.
T
Place a cup under the coffee spout.
T
Press the ‘Espresso’ button.
The grinder starts up. ‘Espresso’ is displayed.
T
Turn the grinder adjustment switch to the desired position
while
the grinder is running.
The espresso is prepared and the consistency of grind is
adjusted.
T
Close the storage compartment cover.
Adjusting the grinder
NOTICE