background image

27

4  Permanent settings in programming mode

T

  Press the 

‘ < ’

 or 

‘ > ’

 button to change setting for the interval 

to 

‘40 sec.’

.

T

  Press the 

‘Save’

 button.

‘Saved’

 appears briefly on the display.

‘Latte macchiato’

  

O

  

T

  Press the P button to exit programming mode.

‘Please select product:’

In the program item 

‘Maintenance settings (3/6)’

 you can make the 

following settings:

 

U

‘Filter’

 

U

Activate the CLEARYL Blue filter cartridge (see Chapter 1 ‘Pre-
paring and using for the first time – Inserting and activating 
the filter’).

 

U

‘Water hardness’

 

U

If you do not have a filter cartridge, you will need to set the 
water hardness (see Chapter 1 ‘Preparing and using for the 
first time – Adjusting the water hardness’).

 

U

‘Rinse the coffee system’

 / 

‘Manual’

 

U

The switch-on rinse must be started manually.

 

U

‘Rinse the coffee system’

 / 

‘Automatic’

 

U

The switch-on rinse is started automatically.

 

U

‘Rinse the milk system’

 / 

‘After 10 min.’

 

U

You are prompted to rinse the milk system 10 minutes after 
preparation of a specialty coffee with milk.

 

U

‘Rinse the milk system’

 / 

‘Immediate’

 

U

You are prompted to rinse the milk system immediately 
after preparation of a specialty coffee with milk.

Example: 

Proceed as follows to make the machine prompt you to 

rinse the milk system 

immediately

 after preparing a specialty coffee 

with milk.

Precondition: 

‘Please select product:’

 is displayed.

  

O

  

T

  Press the P button.

‘Maintenance status (1/6)’

  

g

  

T

  Turn the Rotary Switch until the program item 

‘Maintenance 

settings (3/6)’

 is displayed.

T

  Press the 

‘Rinse the milk system’

 button.

‘Rinse the milk system’

Maintenance settings 

Содержание IMPRESSA J9 One Touch





















































Отзывы: