JA37-300 Aural Message Generator - 3 Channel - Analog Inputs
Installation and Operating Manual
Rev B
Page 10
2.6.3.4
JA37-300 Connector Maps
The connector Maps and Interconnects for the unit showing any changes made to the connector pin selection
) are shown in this section.
2.6.
4
Other Configuration Features
In the JA37-300 Product Information Window, the model number, serial number and check sum of the JA37-300 Aural
Message Generator - 3 Channel can be viewed.
2.7
Installation Kit
The kit required to install this unit is not included with the unit.
The installation kit (Part # INST-JA37) consists of the following:
Quantity
Description
JAC Part #
1
TAG ring 3/8" ID
CON-5500-0375
1
D-Sub 25-pin connector, hood and 25 crimp pins
CON-3420-0025
1
3/4" Inside Diameter, Heat Shrink Tube
WIR-HTSK-0750
2.7.1
Recommended Crimp tools
Tool Type
Hand crimp tool
Positioner
Insertion/extraction tool
Positronic
9507-0-0-0
9502-5-0-0
4711-2-0-0
Daniels
AFM8
K13-1
91067-2
MIL-SPEC
M22520/2-01
M22520/2-08
M81969/1-02
2.8
Installation Drawings
The drawings and documents required for Installation can be found in
2.8.1
Generation of Custom Drawings
The connector map and interconnects in Appendix A of this manual are generic drawings based on the standard
version of the JA37-300. However, if a unit has been configured using JAC’s ProCS™ software to change connector
pins, the software can be used to generate fully customized drawings for use by the installer.