JA37-300 Aural Message Generator - 3 Channel - Analog Inputs
Installation and Operating Manual
Rev B
Page 9
Saving new Audio Files
Note
: This pane will not have the full content shown
here if no JA37-300 is connected.
When suitable alert messages are listed in the
'Audio Files' section, they are uploaded to the
JA37-300 by selecting 'Program' from the main
ProCS menu, and clicking on
'Write JA37-300 Messages…'.
The window 'Select Messages to Write' (see below)
will open, allowing the selected audio file message
to be uploaded to the JA37-300. ProCS will
automatically convert any WAV file to the required
audio sample rate for the JA37-300.
A selection of suitable WAV files can be found on
the JAC website:
Products>Software>Wave File Messages
www.jupiteravionics.com/productsoftware
The 'Select Messages to Write'
window is shown. Similar
windows will open for the 'Read'
and 'Erase' selections. The
desired message is chosen using
the check box to the right of the
message number, or by clicking
on the 'Select All' button.
2.6.3.3
JA37-300 RX Audio Levels
The Phones 1 and Phones 2 RX AUDIO levels may be may be selected from 1 to 8 Vrms (default
7.8 Vrms
).
