JA37-300 Aural Message Generator - 3 Channel - Analog Inputs
Installation and Operating Manual
Rev B
Page 7
2.6.2 ProCS™ Setup
The JA37-300 menu item 'ProCS Setup' provides Setup drawings showing the cabling arrangement for
connecting the JA37-300 to a computer to allow configuration using ProCS™.
2.6.3
Configurable Settings
A standard unit is shipped from the factory with all internal adjustments configured to the default levels (shown in
bold). At installation, it may be desirable to change some of these settings to suit the aircraft operating requirements.
Within ProCS™ the configurable settings for the JA37-300 are grouped together into the following sections:
2.6.3.1
JA37-300 Configurable Pins Function Select
Several of the connector pins can be configured to meet the requirements of specific installations. Refer to the
JA37-300
Selections can be made to configure sensor types (Discrete; Tachometer; Pressure
Transducer; Thermocouple) and their associated outputs and trigger levels.
If the
'Message Trigger Priority
' box is checked, the signal Priority will be
shown
.
The message Playback may be
selected as '
Continual
' or 'One-Shot'
for each message (1 through 3).
Drop-down windows allow selection
of sensor type and trigger activation
(Greater Than; Less Than)
