JA10-001 Audio Controller - Ten Transceiver
Installation and Operating Manual
Rev A
Page 5
1.4.1.3
Discrete Signals
Active low control input, active signal level
≤
+3 Vdc
Active low control input, inactive signal level
≥
+10 Vdc
Active low control input, current
0.1 to 10 mAdc
Active low control output, active output
≤
+2 Vdc
Active low control output, active, current
≤
1 Adc
1.4.1.4
Lights Inputs
LIGHTS INPUT ranges
0 to 28, 0 to 14 and 0 to 5 Vdc
LIGHTS INPUT current
10 mA max.
1.4.2
Mechanical Specifications
Height
1.875 in [47.63 mm] max
Behind panel depth
6.96 in [176.8 mm] max
Faceplate width
5.75 in [146 mm] max
Behind panel width
4.92 in [125 mm] max
Weight
2.49 lb [1.13 kg] max
Material
brushed aluminum with conversion
coating
Connectors (3):
J1
One 62-pin D-Sub male
J2
One 62-pin D-Sub male
J3
One 26-pin D-Sub male
J4
One 4-40, 0.5 in. max. stud
J5
One 4 pole 3.5mm stereo jack
Mounting
4 Dzus fasteners
Bonding
≤
2.5 m
Ω
Installation kit part number
INST-JA10
1.4.3
Flammability of Materials
The JA10-001 complies with the requirements of RTCA/DO-160G Sec 26.3.3 "Flammability", through equivalent
flammability testing of materials and the Small Parts Exemption.
1.4.4
Configuration Connector
The JA10-001 Audio Controller - Ten Transceiver
configuration connector communication standard for CONFIG
DATA TO JA10
data input signal and CONFIG DATA FROM JA10
data output signal is RS-232.
1.4.5
Product Configuration Software Version
Configuration of the JA10-001 Audio Controller - Ten Transceiver
requires the Product Configuration Software
(ProCS) version v0.60.0 or
later. Refer to the release notes from
http://www.jupiteravionics.com/productsoftware.php
or contact Jupiter Avionics to ensure the correct version is used.