JA10-001 Audio Controller - Ten Transceiver
Installation and Operating Manual
Rev A
Page 19
(4)
EMER Legend
The
EMER
(Emergency) legend marks the
Emergency position of the Transmit selector (5).
To select emergency mode, the control must be pulled and
turned to the
EMER
position.
For full information on Emergency and Normal Mode operation,
see
(5)
USER 1 Transmit and Emergency mode Selector
This is a rotary eleven-position control that is used to select transmission
via one of the transceivers.
The appropriate annunciator will light green to show which transceiver is selected for transmit - ‘
COM5
’ in this example.
Each of the transmit selector positions is linked by a white line to the corresponding transmit select annunciators,
transceiver switches and legends –
Default
-
COM1
through
COM9
and
AUX
. Position one (the furthest counter-
clockwise position) selects Emergency mode (
EMER
). To select emergency mode, the control must be pulled and
turned to the
EMER
position. When in the
EMER
position all transmit select annunciators are unlit.
(6)
Music/Configuration Connector (
♫
/io)
(This connector is also used during installation to change configuration settings.)
CAUTION
:
Attempting to connect an incompatible plug or device could damage the unit, the attached
device, or both. If in doubt, check with your installing agency.
This is a music input that is compatible with most
music players. It accepts a 3 pole 3.5mm stereo plug
with a slim diameter connector housing.
The port (
♫
/io) is protected by a flexible cover, which can
be lifted upwards or rotated round (as shown) to provide
access to the port.
♫
/io Port
Port Cover