Rev A
Page 17
JA10-001 Audio Controller - Ten Transceiver
SECTION 3 – OPERATION
3.1
Introduction
This section contains the operating instructions for the JA10-001.
Note
: The JA10-001 USER 2 controls are on an optional separate remote control panel, and can be found in
the JCP3-x01 manual.
3.2
USER 1 Front Panel Controls
Note
: The legends and deadfront annunciator may be ordered with custom markings. The controls will be
referred to by the default legend and annunciator names as shown below.
1.
Transceiver receive audio select switches, TX select annunciators and associated legends
2.
Receiver audio select switches and associated legends
3.
Receive volume control
4.
EMER legend
5.
Transmit and Emergency mode selector
6.
Music/configuration input connector
7.
Transmit annunciator (deadfront)
8.
VOX/ICS volume control