Jupiter Avionics JA10-001 Скачать руководство пользователя страница 26

Страница: 26 / 46

JA10-001 Audio Controller - Ten Transceiver

Installation and Operating Manual

Rev A

Page 22

3.4

USER 2 Normal Operation Mode

Note

: All USER 2 operation is per the applicable control device.

3.5

USER 3 to 8 Normal Operation Mode

Note

: USER 3 to USER 8 are configured to operate by the USER 1 controls (default) or the USER 2

controls as selected through ProCS™. Check your configuration with the installing agency.

3.5.1

Receive Audio

USER 3 to 8 will hear the receiver audio as selected and level controlled (RX) by either the USER 1 or USER 2, as

configured by ProCS™.

3.5.2

Direct Audio

USER 3 to 8 will hear the direct audio sources as configured by ProCS™.

3.5.3

Transmitting (Transmit Operation)

USER 3 & 4 (designated at installation) will transmit on the transceiver selected by either the USER 1 or USER 2, as

configured by ProCS™.

3.5.4

ICS Operation

USER 3 to 8 will hear the intercom audio as level controlled (ICS) and VOX control (VOX) by either the USER 1 or

USER 2, as configured by ProCS™.

3.5.5

ICS Isolation

USER 3 to 8, when ICS Isolation mode is active, will hear the intercom audio from either only USER 1 & 3 to 8, or only

USER 2 to 8, or only USER 3 to 8, as configured by ProCS™.

3.5.6

Music Operation

USER 3 to 8 will hear the music audio as via either the USER 1 or USER 2 music inputs, as configured by ProCS™.

3.6

Emergency Operation Mode

The JA10-001 is in emergency mode when aircraft electrical power is lost or if Emergency Mode has been selected

on the JA10-001 Front Panel TX and EMER Select switch, the optional control device EMERGENCY/NORMAL select

switch, or the optional external EMERGENCY/NORMAL select switch.

3.6.1

Auto Emergency Mode

If the unit is in emergency mode because power has been lost to the unit, the sum of the COM 1 transceiver, NAV 1

receiver, and DIRECT 1 to 4 is routed to the USER 1 PHONES and USER 1 CVR. The USER 1 MIC and USER 1 TX

PTT key are connected to the COM 1 transceiver.

The sum of the COM 2 transceiver, NAV 2 receiver, and DIRECT 1 to 4 is routed to the USER 2 PHONES and USER

2 CVR. The USER 2 MIC and USER 2 TX PTT key are connected to the COM 2 transceiver.

No other functions in the JA10-001 will operate when power is lost.

Содержание JA10-001















































Результаты поиска

Содержание JA10-001

Отзывы:

Похожие инструкции для JA10-001

Бренды по названию

Популярные бренды

Jupiter Avionics JA10-001, Инструкция по установке и эксплуатации

Результаты поиска

Содержание JA10-001

Отзывы:

Похожие инструкции для JA10-001

Бренды по названию

Популярные бренды