Juntek DPM-8605, Руководство пользователя

Страница: 11 / 18

11
11
Introduction of voltage and current upper and lower limits:
The upper and lower limits of the voltage and current are set voltage upper
limit adjustment limits and lower limit adjustment limits. For example: set 30V,
5A in the main interface, enter the voltage and current upper limit save
position, press OK to save it as the upper limit of voltage and current, and the
product's voltage adjustment range is up to 30V, the maximum current is 5A.
The same method can also set the lower limit of adjustment.
Communication protocol function:
There are two kinds of communication protocols: simple communication
protocol and MODBUS communication protocol, which can be selected on the
product. We can provide communication protocols.
Simple communication protocol is our custom communication protocol, it
is easy to understand.
MODBUS communication protocol is the standard MODBUS
communication protocol.
Quick response function introduction:
After the quick response is turned on,the response time is short when the
voltage is adjusted from high to low. For example, when the output is 30V,
adjust it directly to the output of 5V. When the quick response is not turned on,
it takes 5 seconds to reduce from 30V to 5V. After turning on the quick
discharge, it takes less than 1 second to reduce from 30V to 5V.
Power-on default status setting introduction:
The default state of power-on refers to whether the output is turned on or off
by default when the power is turned on. When this function is enabled,After
the power is turned on, the output voltage and current values are directly
turned on without operating.
Key locking function
Long press OK key can press key lock, when key lock state long press OK
key can cancel keystroke lock