Juniper Ultra-Rubbed Field PC, Справочное руководство

Страница: 109 / 176

CAUTION:
Do not use tissues, paper towels, or harsh
cleaning agents to clean the touchscreen.
3. If you used a cleaning solution, rinse the touchscreen
with water and dry it with a microfiber cloth.
4. Press the power button to resume the device.
CAUTION: Long exposure to the following solutions may
damage your device:
pine oil
oil based paint
automotive brake cleaner
isopropyl alcohol
carburetor cleaner
In case the device is exposed to one of these solutions,
wipe it off with a mild cleaning solution.
Case overmolding. Clean the rubber-like overmolding
that surrounds the case with a cloth and a mild cleaning
solution like
409 or Citrus Wonder . After you are done
cleaning, rinse the device with water.
Communications module (area housing the
USB port, DC jack, serial port).
To clean the
communications module, run it under a faucet. Use a
soft toothbrush or toothpick to clean out any remaining
dirt.
Speaker and microphone. If debris gets in the speaker
or microphone, use a soft bristle brush to remove it. Do
not insert any object into the speaker or microphone
holes.
Stylus slot.
Rinse the stylus slot with water.
Display bezel. If the edge under the bezel gets dirty, use
a microfiber cloth to remove the debris. Do not remove
the bezel.
•
•
•
•
•
101
Chapter 10: Caring for Your Field PC