Juniper Ultra-Rubbed Field PC, Справочное руководство

Страница: 35 / 176

Chapter 3: Using the Hardware
27
2. Tap and hold the file you
want to copy to your Field PC.
A pop-up menu appears, as
shown here.
Note : If you want
to copy multiple files, tap and
drag the stylus over the files.
Once the files are selected, tap
and hold the stylus on the files
until a pop-up menu appears.
3. Select Copy .
4. Open the destination folder where you want to place
your copied file.
5. Tap and hold the stylus on the
white space below the existing
files until the pop-up menu
appears again.
6. Select Paste . The file is copied
and its name appears on the
screen.
Reattaching the standard cap.
To reattach the standard cap,
follow these steps:
1. Make sure the hand strap is attached to its top latch.
2. Place the standard cap over the case.
3. Use a screwdriver to turn the standard cap screws
until they are firmly in place.
CAUTION: Do not overtighten the screws. Tightening
the screws over 12-in-lbs (1.36 N-m) could result in
a failure. The torque specs for the standard cap are
2-in-lbs (0.23 N-m).
CAUTION: When the standard cap is removed, the
Field PC is not sealed. Avoid exposing the Field PC