![Juniper STRM 2500 Скачать руководство пользователя страница 43](http://html1.mh-extra.com/html/juniper/strm-2500/strm-2500_hardware-installation-manual_2032545043.webp)
STRM Series II Hardware Installation Guide
B
R
ACK
-M
OUNTING
THE
STRM
S
ERIES
II A
PPLIANCE
This appendix provides the types and procedures for mounting the STRM Series II
appliances on the Juniper UNIMOUNT rack-mount systems.
The following rack type is supported by these procedures:
•
19” 4-post rack
•
19" 2-post rack
The rack-mount system is flexible and offers several options for rack-mounting the
hardware. The different options include:
•
Front-Mounting Flush to Rack
•
Front-Mounting Recessed in Rack
•
Front-Rear- Mounting Flush to Rack
•
Front-Rear- Mounting Recessed in Rack
•
Mid-Mount in Two Post Equipment Rack
Note:
If you are installing multiple STRM appliances in one rack, you should install
the lowest one first and proceed upward in the rack. Install heavier STRM
appliances in the lower part of the rack.
Front-Mounting
Flush to Rack
This option is the default configuration for STRM 500 II and STRM 2500 II
appliances.
To mount the appliance using this option:
Step 1
Attach the chassis to the equipment rack using 4 rack-mount screws on each side
of the system. See
Figure 18
.
Step 2
Verify that the mounting screws on one side of the rack are aligned with the
mounting screws on the opposite side and that the appliance is level.
Содержание STRM 2500
Страница 6: ......
Страница 12: ...STRM Series II Hardware Installation Guide 4 STRM OVERVIEW...
Страница 32: ...STRM Series II Hardware Installation Guide 24 PREPARING YOUR SYSTEM FOR STRM SOFTWARE INSTALATION...
Страница 48: ...STRM Series II Hardware Installation Guide 40 RACK MOUNTING THE STRM SERIES II APPLIANCE...