Juniper SRX1500, Руководство по оборудованию

Страница: 90 / 168

•
Two security zones are created: trust and untrust.
• Interface ge-0/0/0 is in the untrust zone, while interfaces ge-0/0/1 through ge-0/0/3
are in the trust zone.
•
A security policy is created that permits outbound traffic from the trust zone to the
untrust zone.
• Source Network Address Translation (NAT) is configured on the trust zone.
If the current active configuration fails, you can use the load factory-default command
to revert to the factory-default configuration.
Related
Documentation
Viewing SRX1500 Services Gateway Factory-Default Settings on page 72
•
•
Accessing J-Web on the SRX1500 Services Gateway on page 77
•
Configuring the SRX1500 Services Gateway Using J-Web on page 72
•
Accessing the CLI on the SRX1500 Services Gateway on page 77
Viewing SRX1500 Services Gateway Factory-Default Settings
To view the factory-default configuration of the services gateway using the CLI:
1.
Log in as the root user and provide your credentials.
2.
View the list of default config files:
root@srx1500> file list /etc/config
3.
View the required default config file.
root@srx1500> file show /etc/config/<config file name>
Related
Documentation
Understanding SRX1500 Services Gateway Factory-Default Settings on page 71
•
•
Accessing J-Web on the SRX1500 Services Gateway on page 77
•
Configuring the SRX1500 Services Gateway Using J-Web on page 72
•
Accessing the CLI on the SRX1500 Services Gateway on page 77
Configuring the SRX1500 Services Gateway Using J-Web
• Configuring Root Authentication and the Management Interface from the CLI on page 73
• Configuring Interfaces, Zones, and Policies with J-Web on page 74
Copyright © 2017, Juniper Networks, Inc. 72
SRX1500 Services Gateway Hardware Guide