Juniper Mesa 3 Скачать руководство пользователя

Страница: 61 / 82

Appendix C Warnings, Regulatory Information, Licensing

Improper battery use may result in a fire, explosion or other

hazard.

CAUTION:

Risk of explosion if the battery is replaced by an

incorrect type.

Wall Charger Warnings

WARNING!

To reduce the risk of personal injury, electrical

shock, fire or damage to the equipment:

Plug the wall charger into an electrical outlet that is easily

accessible at all times.
Do not place anything on the wall charger cord or any

of the other cables. Arrange them so that no one may

accidentally step on or trip over them.
Do not pull on a cord or cable. When unplugging the wall

charger from the electrical outlet, pull on the plug, not the

cord.
The AC wall charger must be approved by Juniper Systems,

have an output rating of 12 VDC and a minimum 1.67 A,

and be certified or listed by a nationally recognized testing

laboratory. The AC wall charger provided with the Mesa 3

meets these criteria. Using any other external power source

can damage your product and void your warranty.

Содержание Mesa 3



















































































Результаты поиска

Содержание Mesa 3

Отзывы:

Похожие инструкции для Mesa 3

Бренды по названию

Популярные бренды

Juniper Mesa 3, Руководство пользователя

Результаты поиска

Содержание Mesa 3

Отзывы:

Похожие инструкции для Mesa 3

Бренды по названию

Популярные бренды