Juniper Mesa 3 Скачать руководство пользователя

Страница: 16 / 82

Mesa 3 Rugged Tablet Owner’s Manual

CAUTION:

Always power off the tablet before removing

the battery. Failure to do so may cause loss of data or

damage to the tablet. EXCEPTION: If your tablet has an

internal battery, this caution does not apply. You can

safely remove the removable battery while the unit is

running.

3. Remove the battery pack by pulling up on the black tab

on the battery pack.

4. An image on the battery compartment label shows the

correct location and orientation for the SD card (slot on

the right). Pull the flexible card holder back out of the

way. Push the card into the slot to insert it.

5. Push the flexible card holder back into place, covering

the card slots.

6. Replace the battery pack, and attach the battery door.
To remove the SD card, pull it out. Use tape or an eraser if

you have trouble.

Audio Features

The Mesa 3 has the following audio features:

Speaker - The speaker provides audible indicators

and program feedback. You can listen to mono audio

files and watch video. For stereo audio, use

Bluetooth

headphones or HDMI output from the optional dock.

Microphone - Use the microphones to record audio notes

or include sound in a video, using the camera (option).

Built in microphones can also be used for Skype calls.

Audio Jack - The audio jack supports a stereo headset

or headset/microphone combination with 3.5 mm

connections.

SD Card
Slot

Flexible
Card Holder

Содержание Mesa 3



















































































Результаты поиска

Содержание Mesa 3

Отзывы:

Похожие инструкции для Mesa 3

Бренды по названию

Популярные бренды

Juniper Mesa 3, Руководство пользователя

Результаты поиска

Содержание Mesa 3

Отзывы:

Похожие инструкции для Mesa 3

Бренды по названию

Популярные бренды