Juniper Mesa 3 Скачать руководство пользователя

Страница: 19 / 82

Chapter 2 Standard Features

Power Management

The Mesa 3 runs on battery power, using a rechargeable, Li-

Ion battery pack. A non-removable, internal battery pack is

an option.

Charging the Battery Pack(s)

For instructions on how to insert and charge the removable

battery pack, refer to

Chapter 1, Install the Battery Pack

For tablets that have both a removable battery pack and

an optional internal battery pack, the intelligent internal

battery charging circuit first

charges the battery pack with

the least amount of energy. When this battery pack comes

to the same level as the other battery pack, then both

battery packs are charged at the same time until they are

both fully charged.

Battery packs are charged most efficiently at room

temperature (68°F or 20°C). They will not charge if it is too

hot or too cold.

CAUTION:

Only use the battery charger that came with your

Mesa 3 tablet.

The Mesa 3 requires a 30W or higher power

supply with a 12V output to power the tablet and charge

the batteries at the same time within the specified 4-6 hour

time frame. Anything less will not allow the tablet to operate

as specified.

Battery Status and Management

To find out how much

battery life you have left, tap on

the battery icon at the bottom of the desktop screen. The

amount of charge left as a percent and the status of each

battery is shown. The cumulative amount of battery life left

for installed batteries and the approximate amount of time

battery power will last is also shown. The amount of time left

varies depending on what you are doing with the unit.

Battery Life

Battery life on a full charge can be 12 hours or more. This

varies depending on whether or not you also have an

optional internal battery, the applications used, backlight

usage, and radio usage. The optional internal battery adds

5-6 extra hours of battery life.

Содержание Mesa 3



















































































Результаты поиска

Содержание Mesa 3

Отзывы:

Похожие инструкции для Mesa 3

Бренды по названию

Популярные бренды

Juniper Mesa 3, Руководство пользователя

Результаты поиска

Содержание Mesa 3

Отзывы:

Похожие инструкции для Mesa 3

Бренды по названию

Популярные бренды