Juniper Mesa 3, Руководство пользователя

Страница: 18 / 82

14
Mesa 3 Rugged Tablet Owner’s Manual
3. Make Bluetooth discoverable on both devices. Bluetooth
on the Mesa 3 is off by default. To activate it, open the
Action Center and press and hold the Bluetooth icon.
Select Go to settings .
4. In the Bluetooth settings screen, you should see a list of
all Bluetooth devices within range. Tap on the name of
the device in the list you would like to pair with, then
tap Pair . If prompted, enter the PIN or pass code of
the paired device. You should now be paired with the
device.
Note: If Bluetooth is on and the tablet enters sleep or
hibernate mode, Bluetooth turns off to save battery power.
The connection is resumed once it powers back on.
Wi-Fi Wireless Networking
The Mesa 3 has built-in Wi-Fi wireless networking to connect
to the internet or an office network.
Connecting to a Wi-Fi Network
To use Wi-Fi, you need to be in range of a Wi-Fi access
point to make a connection. When Wi-Fi is turned on (the
default), the Mesa 3 automatically starts scanning the area
for available Wi-Fi networks.
From the Action Center, click and hold the
Wi-Fi network
icon , then select go to settings . A list of available networks
is shown. Select the network you want to use and enter
the network security key. The Mesa 3 remembers the Wi-Fi
network connections created.
Wi-Fi can be turned off and on and settings can be
managed from this set up screen.